T-Bar Rows: Form, Variations, & Common Mistakes (2024)

Training your back does more than just contribute to a balanced physique. It can also boost sports performance and protect against injury in the long run. On top of that, it fires up your metabolism by recruiting large muscle groups.

Pull-downs, chin-ups, and negative pull-ups will add size to your lats, but if you want a thick back, T-bar rows are your best bet. This classic bodybuilding exercise allows you to load more weight, leading to massive gains.

The T-bar row was featured in Pumping Iron, the iconic documentary that made Arnold a household name. A few weeks ago, Schwarzenegger shared the above video on Instagram, saying that T-bar rows are still one of his favorite exercises.

Frank Zane, Franco Columbu, and other legends of the Golden Era performed this compound movement regularly as part of their back workouts.

Despite its perks, this classic back move is far from perfect. As you increase the weight, you may begin to experience lower back pain and stiffness. But it doesn’t have to be that way.

That’s what we’ll discuss below. Our team we’ll show you how to perform T-bar rows safely and stay injury-free. We’ll also share some cool variations to keep your workouts varied and prevent strength plateaus.

Let’s dive in!

What Muscles Do T-Bar Rows Work?

The T-bar row is pretty similar to barbell rows, except that it allows you to use a neutral grip and hence lift more weight. Plus, it involves a shorter range of motion compared to bent-over rows.

This compound movement can be performed on a T-bar machine or with a barbell in a landline setup. Most folks use 45-pound plates. Some pros, however, switched to 25-pound plates as they allow for a greater range of motion.

What makes the T-bar row stand out is its ability to hit all the major muscle groups in the upper, middle, and lower back.

The primary muscle worked is the latissimus dorsi, but your traps, shoulders, chest, and arm muscles will get an intense workout, too.

This old-school favorite also engages the following muscles:

All in all, T-bar rows provide a full-body workout. When done right, they can make you stronger, build explosive power, and shape your back.

Besides being one of the best lat exercises, this movement strengthens the muscles surrounding your lumbar spine and may help prevent lower back pain. Compared to the bent-over row, it puts less stress on the shoulder joints because you’re using a neutral grip.

T-Bar Row Form Tips

While the T-bar row is great for building back strength, doing it with poor form can do more harm than good. Common mistakes, such as keeping your legs straight or not bending over enough during the lift, may lead to back and knee injuries.

But that’s why we’re here. Our mission is to help you get the most out of your workouts, whether you’re training back, legs, chest, or shoulders.

First things first, start with a light load. If you’re a beginner, aim for 25- to 35-pounds. This way, you’ll achieve a full range of motion on both the positive and negative portions of the rep without straining your back.

As a rule of thumb, maintain a neutral spine throughout the movement. Flexing your back would allow you to go heavier, but you’ll put stress on the spine. Over time, repeated spinal flexion can lead to disc degeneration or back injuries.

Pay attention to your grip as well. A narrow grip forces you to keep the elbows closer to your body and squeeze your lats when lifting the barbell. A wider grip may feel more comfortable, but you won’t achieve the same range of motion.

Here’s another tip: brace your core and squeeze your glutes as you lift the bar to prevent your back from arching. Take deep breaths and draw your navel in. Contract your shoulder blades at the top and hold for a second or two.

So, are you ready to give it a try? Here’s how to do T-bar rows like a pro, whether you’re working out at home or in the gym!

Lying T-Bar Row Instructions and Form Tips

If your gym has a T-bar machine, go ahead and use it.

Doing T-bar rows on a machine is safer than using a barbell, especially for beginners. Your chest and core muscles are supported by a pad, which helps stabilize your torso and reduce spinal flexion.

The T-bar machine makes it easier to use proper form. Some trainees find it uncomfortable, but that’s a matter of personal preference.

For best results, perform this exercise when training your back or as part of a full-body workout.

Follow these steps:

1. Load the T-bar machine with weight plates.
2. Lie prone on the pad and grasp the handles.
3. Brace your core and pull the T-bar toward your chest. Keep your upper body stable throughout the movement.
4. Squeeze your shoulder blades and keep your elbows close to your sides. Your upper back muscles and shoulder blades should be fully contracted at the top of the movement.
5. Hold for a second and then slowly lower the weight back. Repeat.

Use your back muscles to control the barbell rather than pulling with your arms. Lift and then lower back the weight in a slow, controlled manner. Avoid using momentum.

Lever T-bar Row

The lever T-bar row uses the same movement pattern as the exercise above, except that there is no pad to put your chest on. Using proper form is critical. It takes just one wrong move to get a herniated disc, sciatica, or lower back pain.

Here’s how to perform this movement safely:

1. Load the T-bar with the desired amount of weight. Step onto the T-bar row platform.
2. Bring your hips back and bend the knees slightly so that your torso is above parallel to the floor.
3. Grab the lever handles and pull the weight toward your chest. Keep your back straight and avoid swinging your hips.
4. Squeeze your shoulder blades together and brace your core while lifting the weight.
5. Lower the barbell in a controller fashion until your arms are fully extended. Repeat.

Use a lighter load if your upper body goes beyond 45 degrees. Maintain a neutral spine, allowing your chest to rise slightly as you lift the barbell.

T-Bar Row with Handle

Not all gyms have a T-bar machine, but you can use a standard barbell with or without a V-handle.

Another option is to replace the V-handle with a rope attachment or a towel.

1. Place the end of a barbell in the corner of a wall. If you’re working out at home, put a towel or some padding between the barbell and the wall to prevent scratches.
2. Load the barbell with weight plates and attach a V-handle, a towel, or two free motion handles to it.
3. Straddle the bar and position your body close to the weight plates.
4. Bend your knees and bring your hips back until your torso is above parallel to the floor.
5. Grab the handle or whatever attachment you’re using and pull the weight toward your chest. Don’t arch your back or swing your hips.
6. Lift the barbell while squeezing your shoulder blades together.
7. Pause and then lower back the weight with a slow, controlled motion. Repeat.

Use 25- or 35-pound plates instead of 45s to achieve a greater range of motion. Bend at the hips as far as you need to fully activate your lats.

One-Arm T-Bar Rows

Unilateral exercises, such as one-arm T-bar rows and single-arm dumbbell rows, increase strength and muscular definition. Surprisingly, both sides become stronger, says the American Council on Exercise.

Moreover, this training method strengthens the deep core muscles that support your spine and pelvis, which may help prevent injuries. A strong core is essential for athletic performance and functional fitness.

One-arm T-bar rows require the same lifting technique as the standard T-bar row.

The difference is that you’ll use one arm to lift the barbell. This movement improves grip strength and recruits the biceps to a greater extent compared to bilateral variations.

So, are you up for a challenge?

Follow these instructions to perform single-arm T-bar rows with perfect form:

1. Place the end of a barbell in the corner of a room.
2. Load the bar with one or two 25-pound plates.
3. Stand next to the barbell with your legs hip-width apart.
4. Get into a squat position so that your torso is above parallel to the floor.
5. Grasp the bar with one hand. Position your hand close to the weight plates. Remember to keep your back straight.
6. Lift the barbell in a controlled manner. If you do it right, you should it in your lats from top to bottom.
7. Lower the weight back to the starting position and repeat. Do the same on the opposite side.

Common Rowing Mistakes to Avoid

The T-bar row requires balance and core stability.

If you swing your hips or arch your back, you risk ending up with an injury. Plus, you may not be able to fully activate your lats.

To help you out, we’ve compiled a list of common rowing mistakes and what to do instead:

• Keeping your legs straight when lifting the barbell — Make sure your knees are bent during the lift so that you have a solid base to hold yourself in place. If you keep your legs and lock your knees, you may end up with back, knee, or hip injuries.
• Using 45-pound weight plates — Use several smaller weight plates rather than one or two 45s to get a full range of motion. A 25-pound plate, for example, has a smaller diameter than a 45-pound plate, allowing you to pull the barbell higher.
• Flexing your wrists — Some gym-goers flex their wrists in an attempt to lift heavier. This common mistake can affect your grip and lead to wrist injuries. Keep your wrists straight throughout the movement and focus on increasing grip strength.
  Pulling with your biceps — Lead with your elbows, not your biceps. By using your biceps, you’ll fail to fully engage your back and build massive lats. Squeeze your back muscles when pulling the weight to your chest and use them to control the movement.
• Flaring your elbows — Keep your elbows close to your body at all times. Performing this exercise with your elbows flared out will cause your chest to cave in and limit your ability to squeeze the back muscles.
• Rounding your lower back — It goes without saying that rounding your back during the lift leaves your spine vulnerable to injuries. The same goes for squats, deadlifts, bent-over rows, and seated cable rows.

T-Bar Row Standards

As mentioned earlier, your best bet is to start with a lighter weight and increase it gradually. Going too heavy will prevent you from achieving a full range of motion and force you to arch your back or flex your wrists.

Strength Level provides a handy chart that you may use for reference.

A 180-pound novice athlete, for example, should be able to lift about 140 pounds when performing this exercise. Aim for 93 pounds or so if you’re a beginner.

An intermediate male athlete of the same weight will lift around 200 pounds, while an advanced athlete should lift 272 pounds or more.

A 150-pound female athlete should aim for 40 to 214 pounds, depending on her fitness level. If you’ve been working out for several years, strive for 158 pounds and up.

Focus on building up your strength before adding more weight to the bar. Compound movements, such as the squat, deadlift, and bench press, can help you get stronger overall and build a solid foundation for heavy lifts.

Another option is to try out StrongLifts or other similar programs. Check out our guide to Starting Strength versus StrongLifts to learn more!

Tips From the Coach

“I’ve always used T-Bar Rows in my back workouts to develop more thickness and size into my lats. I think it is one of the best exercises available to build more size in the back. Along with Barbell Rows and Dumbbell Rows, T-Bar Rows are an essential exercise for building bigger lats.

If you look at the bodybuilders who had the best backs, they all included heavy T-Bar Rows into their back workouts. Arnold, Franco Columbu, Lee Haney, Roy Callender, Robby Robinson, Samir Bannout and Ronnie Coleman all used T-Bar Rows extensively to develop huge lats.

I like including T-Bar Rows into my back workouts in the middle of the routine after my back muscles are warmed up and my body is ready for the heavy lifting of doing T-Bar Rows.”

Here is a sample of my back routine:

• Wide-Grip Chins – 3 sets, 8-10 reps
• Barbell Rows – 4 sets, 6-10 reps
• T-Bar Rows – 3 sets, 6-8 reps
• Hyper Extensions – 3 sets 20 reps

Build Big, Wide Lats with the T-Bar Row

The T-bar row is one of the few back exercises that allow you to go really heavy. Just make sure you start with a weight you can handle. Perform this movement early in your workout to make sure you have the energy needed to give your best.

Pair the T-bar with one-arm dumbbell rows, inverted rows, Meadow’s row, and other classic bodybuilding moves. See John Hansen’s back workout for inspiration.

As far as strength goes, nutrition and training are equally important.

Fill up on protein and carbs to build up your strength and get the most out of your workouts. Try our for massive gains and explosive energy!

What’s your take on the T-bar row? Are there any tips or variations you’d like to share? Drop a line below and let us know your thoughts.